|
| |
Aerators
keep your
coolant
fresh !
|
|
The Oxygenator™ is an
economical approach to extending coolant life. In the absence of oxygen,
anaerobic bacteria multiply, causing coolant to spoil. Injecting oxygen
into coolant using an aerator, maximizes the coolants performance by killing anaerobic bacteria and
encouraging the good aerobic bacteria. Featuring a sintered bronze
diffuser and two oil resistant tubes that can aerate different parts of
one large tank, or two separate tanks in close proximity. The Oxygenator
is built to hold up to the rigors of machining
environments.
One of my favorite uses for
aerators is in
conjunction with oil skimmers. Certain types of tramp oil are not drawn very
well to the oil skimmers belt or disk, or the tank is too long or narrow. By using an
aerator on the opposite end, the bubbling will push the tramp oil to the
oil skimmer in addition to controlling bacteria. This really works! |
|
|
Zebra
Oxygenators
 |
Extend coolant life |
|
Eliminate foul odors |
|
Maintain high oxygen
levels |
|
Industrial-grade bronze
diffuser |
|
Fuel-grade tubing |
|
110 volt (220v also
available) |
|
XBUB1200
Small oxygenator, 1 port, for 1-25 gal sump, 1000 cc/min
$24.00 |
|
XBUB5000
Medium oxygenator, 2 ports, for 25-50 gal sump, 3000 cc/min $49.00
|
|
XBUB8000
Large oxygenator, large port, for 51-100 gal sump,
5000 cc/min $97.00 |
|
Email
info@coolantconsultants.com
Phone (507) 451-8537
Fax (507) 451-5155
Coolant
Consultants, Inc.
1780 Cedar Avenue
North
Owatonna, MN
55060
|
