|
| |
|
Evaporators
from
Coolant Consultants, Inc.
|
Wastewater
Evaporator
Our
most popular model...
WATER EATER Model 120G
|
|
Model120G
|
 |
12-17
GPH |
|
NaturalGas/PropaneHeat |
|
120
Gallon Capacity |
|
|
The Model 120G
is a natural gas or propane heated waste water
evaporator. It is
available in two models, the Model 120G
Carbon Steel version and the Model 120G-SS 316L
Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS).
Typical
applications include minimizing wastewater from machining operations,
parts washing equipment, compressor condensate, mop water, die cast
solutions, and many other water based waste streams.
Installation
is easy consisting of only a 120V electrical
hookup, a 10"
diameter vent stack, and a 3/4" standard pressure
gas line. The unit can be filled three different ways: (1) Using
the supplied 2" coupling on the top of the unit; (2) Removing the lid
and manually pouring in fluid; or (3) Using the optional 70 GPM self
priming fill pump.
After an
initial heat up time of approximately one hour, the Model 120G
will evaporate from 12 to 17
gallons per hour of water. The Model 120G
will automatically shut itself down via a low level control. A
secondary high temperature shutoff is also provided. When a cycle is
completed the waste material can either be drained or vacuumed
out of the unit through the removable lid with a wet/dry vacuum or pump,
or, if it is a solid material, scooped out.
To facilitate cleanout, the interior tank of the 120G is sloped towards
the 2" outlet. The "U" shape burner tube is located
around the perimeter of the process tank allowing access between the
tubes.
|
|
FEATURES
& BENEFITS
|
Heavy
Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L
Stainless Steel)
|
|
Adjustable
Burner (Natural Gas or Propane) with electronic ignition,
flame rectification system, and air pressure sensor
|
|
Automatic
Shutoffs (Low Level Control & High Temperature Shutdown)
for unattended operation
|
|
Simple
one button ON/OFF operation
|
|
Removable
Lid for fast and easy Cleanout
|
|
Fully
Insulated Tank
|
|
Variable
weir oil skimmer
|
|
Power
exhaust allows venting to outdoors
|
|
Quality
polyurethane finish
|
|
Tank
Top at convenient 36" height
to facilitate cleanout
|
|
Easily
installed requiring only a vent stack, electrical
hookup, and gas line
|
|
Industry
Standardized Components. Most parts are available from
major industrial supply
houses. You are not held hostage by high mark up on
"captive" parts only available by the original
equipment manufacturer.
|
| Optional
70 GPM Self Priming Feed Pump |
| Optional
Auto Fill System |
|
One
Year Warranty on Parts & Workmanship |
|
Maximum
Evaporation Rate |
17
GPH: Batch Mode
12 GPH: Auto-Fill Mode |
| Tank
Capacity |
120
Gallons |
| Tank
Construction |
12
Gauge Tank w/ 1" Insulation;
16 Gauge Painted Exterior |
| Tank
Height |
36" |
| Heating
System |
Gas:
Natural Gas or Propane;
200,000 BTU;
81" x 6 ½" Heat Exchanger |
| Dimensions |
43"
L x 35" W x 54" H |
| Utility
Requirements |
3/4"
Gas Line
7" to 14" W.C.
120 VAC/13 Amp/1 Ph |
| Drain |
Funnel
Floor;
2" Drain & Plug |
| Shipping
Weight |
700
Lbs. |
| Warranty |
One
Year Parts & Workmanship |
View Options
and Accessories
|
PART
NO.
|
DESCRIPTION
|
PRICE
|
| 120G |
Model
120G Water Eater
Carbon
Steel Tank, Covers & Stack, 12 Gauge |
7495.00 |
| 120G-SS |
Model
120G-SS
Water Eater
316L Stainless Steel Tank, Covers & Stack, 12 Gauge |
9495.00 |
| AFS |
Auto-Fill
System (Description)
Includes 70 SFP Fill/Cleanout Pump, High level shutdown sensor,
manual pump switch, and diverter valve for concentrated liquid
removal. |
1,895.00 |
| 70SFP |
70
GPM Fill & Cleanout Pump
70 Gallons/Minute, Self-Priming Centrifugal Pump. Mounted with
momentary on/off control switch. Includes diverter valve for
concentrated liquid removal. |
995.00 |
| 20SDH |
Hose
Assembly
20' x
1¼" Vacuum Hose w/Quick Disconnect Fittings, Foot Valve,
and Strainer for transferring from/into tanks or drums. |
195.00 |
|
480V |
480 Volt Power (Model 85E & 125E) |
300.00 |
FOB:
Santa Fe Springs, CA
DELIVERY:
Normally 1 - 2 Weeks
|
Email
info@coolantconsultants.com
Phone (507) 451-8537
Fax (507) 451-5155
Coolant
Consultants, Inc.
1780 Cedar Avenue
North
Owatonna, MN
55060
|
