Home
1780 North Cedar Ave. Owatonna, MN 55060 507.451.8537

Abanaki Mighty Mini® SST Belt Oil Skimmers

Mighty Mini® SST Belt Oil Skimmer
Mighty Mini® SST Belt Oil Skimmer
Abanaki ODM-50 Oil Concentrator
Abanaki ODM-100 Oil Concentrator

Prices

  • AB-SMMS1-XX: $451.00
  • AB-SMME1-XX: $451.00
  • AB-SMMP1-XX: $470.00
  • AB-SMMS2-XX: $570.00
  • AB-SMME2-XX: $570.00
  • AB-SMMP2-XX: $589.00
  • AB-ODM-100: $224.00
  • AB-ODM-50: $79.00

Abanaki Mighty Mini® SST Belt Oil Skimmers

The ideal solution to remove unwanted tramp oil in coolant & parts washers!

Effective.  Removes one (1" wide belt) or two (2" wide belt) gallons or more of medium weight oil per hour.

Compact.  Use it almost anywhere...even through a 2" diameter bunghole in a drum.

Portable.  Use it here today, there tomorrow.  Weighs only 7 pounds, installs in seconds, and runs on 110v. power.  220v motor available.

Complete.  Put it to work right out of the box, or add the option, easy-to-install decanter and brackets for an even more efficient system. 

Durable.  Includes long life fan-cooled motor, sturdy 304 stainless steel construction with integrated 24-hour timer.  Every Abanaki skimmer is backed as well as it's built.  We do it right or you don't pay!

FEATURES

  • Fan-cooled motor
  • 1" and 2" wide stainless steel or specially-engineered plastic belts
  • Both sides of belt are wipes for better efficiency
  • 304 stainless steel base and housing
  • Spring-loaded stabilizer bar
  • 3-foot clear discharge hose and clamp
  • 8-foot grounded power cord w/plug
  • Integrated 24-hour timer w/15 min intervals
  • 6", 12", 18", or 24" belt (measured from mounting point to tail pulley)
  • Use in coolant sumps, parts washers, and plating tanks
  • Portable, easily hand-carried
  • Oil removal rates up to 2 gph (7.6 lph)
  • Designed for liquid level depths from 6" to 24" (15.2 cm to 61.0 cm)
  • Belt and tail pulley can fit through a 2" (5.1 cm) bung hole
  • Different belt materials available
  • 110v and 220v fan-cooled motors available
  • One year limited warranty

BELT MATERIAL OPTIONS

Stainless Steel Belts:  Corrosion-resistant.  One of our most popular oil belt skimmer materials. Works well in most industrial applications where rust inhibitors are not a component of the wash water.

Elastomer Belts:  Can handle abrasive and harsh environments. Used where rust inhibitors are a component of the wash water.

Standard Poly Belts:  Reinforced to resist stretching, able to withstand reasonably high temperatures (up to 170°F), and textured to retain a small amount of oil, thus drawing more oil to itself on subsequent passes. Used where rust inhibitors and temperature are a component of the wash water or where UV sensitivity is an issue. 

Abanaki Mighty Mini® SST Oil Skimmers, belt included

Reach lengths of 6", 12", 18", and 24" available, does not change price...
  • AB-SMMS1-XX  1" Stainless Steel Belt  $451.00
  • AB-SMME1-XX  1" Elastomer Belt  $451.00
  • AB-SMMP1-XX  1" Poly Belt  $470.00
  • AB-SMMS2-XX  2" Stainless Steel Belt  $570.00
  • AB-SMME2-XX  2" Elastomer Belt  $570.00
  • AB-SMMP2-XX  2" Poly Belt  $589.00
Specify reach length in comments section when ordering.

 

Abanaki Oil Concentrators

  • ODM-100  Large Oil Concentrator  $224.00
  • ODM-50  Small Oil Concentrator  $79.00

Call if you have questions or need help ordering!

 

Abanaki Oil Concentrators

The Abanaki Oil Concentrator performs as a virtually complete oil water separator for recycling or disposal of either liquid.  Under most operating conditions, Abanaki skimmers pick up oil with only small traces of water.  However, as surface oil is reduced to a thin layer (1/16 inch or less), more water (or coolant) may be picked up along with the oil.  When used in tandem with an oil skimmer, the Oil Concentrator solves this problem by providing final phase separation.  The result is water (or coolant) available for recycling, and virtually water-free oil for disposal. 

This Oil Water Separator is non-electrical and contains no moving parts -- it simply receives liquid directly from the skimmer.  Based on the principle of gravity separation, the Oil Concentrator tank comes in three sizes so that there is adequate dwell time for the oil and water to separate.  Water discharge is through a tube that has an open end near the bottom of the Concentrator, while oil flow is through a separate drain port near the top.  As additional liquid enters the Concentrator, water and oil are forced out through their respective disposal tubes.

ADVANTAGES

  • Small space requirements
  • No skimmer modifications needed
  • Needs no electricity, timers, sensors, or pumps
  • Minimal maintenance
  • No moving parts

KEY FEATURES

  • Mounts easily on all Abanaki skimmers
  • Brackets and hardware supplied by Abanaki
  • Sludge screen keeps large debris out of skimmed oil
  • Drain plug facilitates routine maintenance

 

Part No.DescriptionPrice
ODM-100Large Oil Concentrator$224.00
ODM-50Small Oil Concentrator$79.00

 

SPECIFICATIONS

Specification
ODM-100 
ODM-50 
Dimensions4.50" x 6.25" x 9.75"2.25" x 3.05" x 7.00"
Weight4 lbs.0.4 lbs.
Optional Hose KitYesYes
Applications 

Use with Tote-it and Mighty Mini

Use with TubeTastic, Mighty Mini, Li'l Blue
Volumes0.56 gallons (2.1 liters)12 oz. capacity
MaterialsFiberglass constructionCalcium carbonate filled polypropylene
Mounting MethodAll brackets and hardware supplied by Abanaki - no skimmer modifications requiredAll brackets and hardware supplied by Abanaki - no skimmer modifications required
OptionsDischarge hose kits for oil and water outletsDischarge hose kits for oil and water outlets
Temperature Limits 33-212°F (0.5 - 100°C) 33-212°F (0.5 - 100°C)
Operating Limits: pH Range

pH of liquid: 0-13

pH of liquid 5-10

 

Specification Notes:

1.  Oil Concentrators are UPS shippable.

2.  Consult factory for recommendations covering operating conditions not listed above.

REPLACEMENT PARTS

 

Link to Purchase Replacement Belts

 

REPLACEMENT 1" WIDE BELTS:

Available in reach lengths of 6", 12", 18", and 24"
BMME-XXElastomer Belt, specify reach length$72.00
BMMS-XXCR Steel Belt, specify reach length$72.00
BMMP-XXPoly Belt, specify reach length$99.00
BMMX-XXHigh-temp Poly Belt, specify reach length$100.00

 

REPLACEMENT 2" WIDE BELTS:

Available in reach lengths of 6", 12", 18", and 24"
BMM2E-XXElastomer Belt, specify reach length$103.00
BMM2S-XXCR Steel Belt, specify reach length$103.00
BMM2P-XXPoly Belt, specify reach length$128.00
BMM2X-XXHigh-temp Poly Belt, specify reach length$140.00