Home
1780 North Cedar Ave. Owatonna, MN 55060 507.451.8537

ClearWater Tech CD10 Ozone Generator

ClearWater Tech CD10 Ozone Generator
ClearWater Tech CD10 Ozone Generator
ClearWater Tech AEROUSnx™ Oxygen Concentrator

Prices

  • CT-CD1030: $1,365.00

CD10 Ozone Generator

The CD10 is a single reaction chamber CD ozone generator with fully adjustable output.  Light weight, wall-mounted, and easy to install.  It does require an air preparation system.  It can be used with a PSA oxygen concentrator, such as the AEROUSnx™.

REQUIREMENTS

  • Air preparation system
  • 5 psi max

DIMENSIONS

  • 19" h x 9" w x 5" d, 9.5 lbs.

ELECTRICAL

  • Universal 90/260V, 47-63 Hz, 1.1 - 0.4 amps, 100 watts

OZONE OUTPUT

  • 1.3 grams/hr @ 4 SCFH (dry air)
  • 1% concentration by weight
  • 4 grams/hr @ 4 SCFH (PSA oxygen)
  • 3% concentration by weight
  • CD1030 - Mini Series CD10  $1365.00

Accessories

ClearWater Tech AEROUSnx™ Oxygen Concentrator

Reliable, Dry Oxygen on Demand Just Got Better!

The AEROUSnx™ oxygen concentrator is designed for commercial applications requiring high levels of oxygen -- up to 95%.  The oxygen is created on-site through the pressure swing adsorption (PSA) process providing a constant flow of oxygen without storage or handling of oxygen cylinders.

The AEROUSnx™ system separates oxygen, nitrogen, and other trace elements from the air.  As the air is pressurized through the system, through an on-board oil-less compressor, molecular sieve beds adsorb the nitrogen; concentrating and supplying the oxygen gas to use.  The nitrogen and moisture are depressurized through the systems waste stream.

Key Features of the AEROUSnx™ System

  • Compact – Small footprint
  • Gas flow meter – Quick reference to check operation
  • External air filters – No need to remove any covers to service filters
  • Easy to service – All components, including sieve beds, are serviceable and readily accessible
  • Produces -80ºF dew point feed gas – Keeps equipment clean and dry for years lowering maintenance and increasing efficiency
  • Built for outdoor conditions– Anodized aluminum base and stainless steel enclosure
  • Generated on-site – Oxygen on demand, no transportation
  • Engineered for high humidity environments

The AEROUSnx™ oxygen concentrator produces 93% oxygen at -80ºF dew point.  Clean dry oxygen has several key benefits when producing corona discharge ozone.  By using 93% oxygen as opposed to 21%, the percent weight of the ozone gas generated is double to triple, depending on product design.  This translates to higher solubility and less gas to dissolve in the water.

Accurate air preparation is critical to efficient ozone production and to the longevity of corona discharge ozone generators. Reliable air prep systems produce more ozone and require far less maintenance.

The air preparation system lowers the dew point of the feed gas. Moist feed gas (air) will cause nitric acid to form inside the generator which decreases ozone production and if not removed, causes corrosion and eventual failure of the generator’s internal components. The ability of the ozone generator to produce ozone is drastically reduced as the dew point rises above -55°C.

OX210  Oxygen Concentrator AEROUSnx™  $1735.00

 

Link to AEROUSnx Oxygen Concentrator

ANNUAL MAINTENANCE

ClearWater Tech products are of extremely high quality, with tight tolerances designed to last through many years of use.  However, they require annual maintenance to ensure efficient operation.

Please contact the ClearWater Tech service department at 805-546-2402, 800-262-0203, or email them at service@cwtozone.com so they can help you perform the maintenance that can extend the life of your unit.