1780 North Cedar Ave. Owatonna, MN 55060 507.451.8537

ClearWater Tech CD10/AD Ozone Generator

CD10/AD Ozone Generator
CD10/AD Ozone Generator


  • CT-CD1010: $1,710.00

Clear Water Tech CD10/AD Ozone Generator

The CD/10AD is a corona discharge ozone generator with a single reaction chamber, fully adjustable output, and built-in air dryer. 


  • 5 psi max


  • 19.5" h x11.5" w x 5" d, 14.5 lbs.


  • Universal 90/260V, 47-63 Hz, 2.2 - 0.8 amps, 200 watts


  • 1.3 grams/hr @ 4 SCFH (dry air)
  • 1% concentration by weight


  • Ships from San Luis Obispo, CA
  • CD1010 - Mini Series CD10  $1710.00



Link to purchase Mini Series Accessories


ClearWater Tech injection manifold systems use only Mazzei injectors for maximum transfer efficiency.  The injector produces a cavitation effect, enabling the ozone gas to join the water stream in the form of extremely tiny bubbles.  These bubbles must be as small as possible in order to increase the ratio of bubble surface area to the amount of ozone entering the water.

Injector Manifold

Part No.DescriptionPrice
IM110Injector Manifold, Mazzei Model 684, Sch80 w/unons, 7-14 GPM, 1" Inlet/Outlet$246.00
IM240Injector Manifold, Mazzei Model 978, Sch40 PVC, 15-40 GPM, 2" Inlet/Outlet$241.50

The ozone check valves are an important component in preventing damage to the ozone generator.  ClearWater Tech valve assemblies are designed to be used in conjunction with the ozone generators to avoid back flow.

Check Valve Assembly

Part No.DescriptionPrice
CKAC10Check Valve Assembly, 384K-784K venturi, 1/4" comp$43.50
CKAC45Check Valve Assembly, 878K-1584K venturi, 1/4" comp$46.50

The vacuum break provides a positive atmospheric "break" between the ozone injector manifold and the ozone generator, preventing water from flowing back into the ozone generator, should the venturi check valve fail.  It is used with all ClearWater Tech corona discharge ozone systems.

The vacuum gauge assembly provides accurate operating parameter measurements.  This gauge assembly also includes a normally open vacuum switch that connects to the external loop of the ozone generator.  When vacuum is sensed the vacuum switch closes, creating continuity through the external loop and initiating ozone production.  Similarly, when vacuum is not sensed, the vacuum switch will open interrupting ozone production.

Vacuum Break and Gauge Assembly

Part No.DescriptionPrice
VJB157Vacuum Break, "J" tube style for 1/4" delivery line$292.50
GAG620Gauge Assembly with Vacuum Switch (0-10) SCFH$213.00


Link to purchase Mini Series Accessories


ClearWater Tech products are of extremely high quality, with tight tolerances designed to last through many years of use.  However, they require annual maintenance to ensure efficient operation.

Please contact the ClearWater Tech service department at 805-546-2402, 800-262-0203, or email them at service@cwtozone.com so they can help you perform the maintenance that can extend the life of your unit.