Home
1780 North Cedar Ave. Owatonna, MN 55060 507.451.8537

Venturi

Venturi types use water passing over an orifice to create suction that draws the concentrate from the container and mixes it with the water. Concentration is controlled by either changing orifice size or turning a metering valve. These units can not operate with any back pressure, so they can only be used to fill a pail or nearby container. Accuracy is also affected by water pressure and concentrate level.

Note: Plumbing codes in some areas may require a backflow preventer or other types of controls before the mixing system. Also, it is always recommended (and required for the warranty) to install a screen filter before the mixer.
 

Groz CMX/3+ Coolant Mixer with stainless steel pick up tube
Groz Plus Coolant Mixers use a rotary disk valve allowing adjustment of the mixing ratio through a simple turn of the knob.
Groz CMX/2+ Antifreeze Mixer with SS pick up tube
Groz Plus Anti-freeze and/or Detergent Venturi Mixers use a rotary disk valve allowing adjustment of the mixing ratio through a simple turn of the knob.
HydroMaster™ Venturi Wall Mounted Proportional Mixer
Economical HydroMaster™ venturi mixers can be used with drums, pails, or jugs of concentrate.
HydroMinder™ Model 511
HydroMinders keep a reservoir filled with ready-to-use solution. When the level in the reservoir drops, the float opens a water valve and the HydroMinder replenishes the supply of solution in the tank. When the level reaches the preset fill level, the HydroMinder automatically shuts off.
Hydro Systems Streamline Series Dispensing System
Hydro Systems Streamline dispensers in stainless steel cabinets dispense a wide variety of automatically diluted solutions at the touch of a button.
Zebra machinist's mixer
This venturi mixes coolant efficiently. Built machinist tough. Comes with a lifetime Zebra warranty.
Zebra Lockout for Machinist's Mixer
MIX03 and MIX10 Series Replacement Parts & Accessories