Dosatron Precision Water Powered Coolant Metering Pumps 3 GPM, 11 GPM, 20 GPM
$460.00 – $1,278.00
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers compensate for flow and pressure changes providing consistent, repeatable results.
Dosatron Precision Water Powered Coolant Metering Pumps 3 GPM, 11 GPM, 20 GPM
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers compensate for flow and pressure changes providing consistent, repeatable results.
FEATURES
- Can be used with hose reels, in-line, and in central mixing systems. Very accurate.
- Dose of concentrate is proportional to the flow rate
- Dose remains precise, constant, and regular throughout the operation
- Wide range of liquid or soluble concentrates can be used
- Hydraulic proportional system eliminates all risks of under or overdosing
- No direct contact with dangerous concentrates
- Operates continuously – just set it and leave it
- Externally adjustable
- Easy to use – just turn the water on!
- Pump below with “VV” designation has viscous hoses
- Most units are available in either AF (pH 7-14) or VF (pH 1-7) seals
NOTE: A water pre-filter is REQUIRED. See Accessories tab below.
| D07RE125VFII | 0.15 to 1.25% | 1:667 to 1:80 | 4.3 to 85 psi | .02 to 3 GPM | $632.00 |
| D07RE5VFII | 0.8 to 5.5% | 1:128 to 1:18 | 4.3 to 85 psi | .02 to 3 GPM | $632.00 |
| D25RE2VFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | $460.00 |
| D25RE2VVFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | $607.00 |
| D25RE5VFII | 1 to 5% | 1:100 to 1:20 | 4.3 to 85 psi | .05 to 11 GPM | $1070.00 |
| D45RE3AFII | 0.5 to 3% | 1:200 to 1:33 | 7 to 70 psi | 0.4 to 20 GPM | $1082.00 |
| D45RE8AFII | 3 to 8% | 1:33 to 1:12 | 7 to 70 psi | 0.4 to 20 GPM | $1278.00 |
| D07RE125VFII | 0.15 to 1.25% | 1:667 to 1:80 | 4.3 to 85 psi | .02 to 3 GPM | 0.08 to 12 LPM | 3 GPM / 12 LPM | 3/4″ NPT |
| D07RE5VFII | 0.8 to 5.5% | 1:128 to 1:18 | 4.3 to 85 psi | .02 to 3 GPM | 0.08 to 12 LPM | 3 GPM / 12 LPM | 3/4″ NPT |
| D25RE2VFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D25RE2VVFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D25RE5VFII | 1 to 5% | 1:100 to 1:20 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D45RE3AFII | 0.5 to 3% | 1:200 to 1:33 | 7 to 70 psi | 0.4 to 20 GPM | 1.51 to 76 LPM | 20 GPM / 76 LPM | 1″ NPT |
| D45RE8AFII | 3 to 8% | 1:33 to 1:12 | 7 to 70 psi | 0.4 to 20 GPM | 1.51 to 76 LPM | 20 GPM / 76 LPM | 1″ NPT |
Recommended Accessories & Replacement Parts
Dilution Solutions pre-plumbed panel systems or locking cabinets include all the necessary accessories. Delivered installation ready!
A water pre-filter is required with all Dosatron Metering Pumps. There are two filter options -- T-Filters or Y-Filters with Cleanouts.
Industrial Plumbing Kits INCLUDE the water pre-filter along with everything necessary to install the Dosatron or HydroBlend Water-Powered Coolant Metering Pumps.
Related products
Can be used with hose reels, in-line, and in central mixing systems. Very accurate. Typically used for higher volume applications such as auto-fill, central coolant distribution systems, or larger tanks.
HydroBlend™ "6000" Series Proportioning Pumps can be used with lower volume applications such as hose reels, in-line, and central mixing systems. Very accurate. The "6000" Series are the high-end pumps, not the value-priced. NOTE: Only models in stock are available in the cart. Call or email to purchase other models, which will require some lead time.
HydroBlend Custom Board Systems include key installation accessories all mounted on a poly board.